ALUSION™ Architectural Stabilized Aluminium Foam is produced by injecting air into molten aluminium, which contains a fine dispersion of ceramic particles. These particles stabilize the bubbles formed by the air, much like dry cocoa powder stabilizes bubbles when it is added to milk.

  • Produced with a continuous casting production method, one sheet at a time
  • Standard sheets available in a 1220 MM X 2440 MM size, custom sizes also available
  • Produced with up to 50% recycled content, and material is 100% recyclable
  • A unique and visually stunning surface material that is more than skin deep
  • Provides beauty, strength and lightweight acoustic solutions for a variety of creative opportunities
  • The various versions of ALUSION™ can be utilized for both interior and exterior applications

 

AlusionTM - Large Cell


  • ALUSION™ Large Cell - Open Both Sides (Translucent)
    The shiny silver skin on both sides of this low density material is removed to create a translucent panel. This panel is extremely lightweight and allows light to pass through. All Alusion™ panels are highly reflective; however the bottom of this panel may be even more than others; sharply reflecting light and even picking up the colour of well lit material at a reflective angle to the panel.
  • ALUSION™ Large Cell – Open One Side
    The shiny silver skin of the large cell is removed and the cells underneath are exposed. This creates a surface that has been described as appearing like an “aluminum sponge”. This is a low density material resulting in large, deep open cells.
  • ALUSION™ Large Cell - Natural
    Natural Features a striking large “frozen molten bubble”  look on the top surface. Due to the delicate nature of its surface, this material is particularly designed for interior applications. With force the bubbles can be collapsed so it is recommended that this material be out of the reach of the public or otherwise protected (example acrylic sheet or glass covered).

 

AlusionTM - Mid Cell


  • ALUSION™ Mid Cell – Open One or Two Sides
    These Mid cell panels are created by removing the surface on one side or both sides of the panel, through a special blasting process. The cells below the skin are exposed. This surface consists of a series of mid cell open areas and swirling solid areas, which mingle together to create an appearance described as similar to the surface of the moon or a frozen porous lava flow.
  • ALUSION™ Mid Cell - Natural
    This is the surface which is created naturally in a Mid density, from our continuous panel line production. This version features a shiny, shimmering silver skin with a unique waved pattern on the surface.

 

AlusionTM - Small Cell


  • ALUSION™ Small Cell – Open One or Two Sides
    As per the Mid open cell product, this panel is created by removing the surface on one of the sides of the panel or both sides, through a special blasting process. Cells below the skin are exposed. This surface consists of a series of small open areas and swirling solid areas. They mingle together to create an appearance described as similar to the surface of the moon or a frozen porous lava flow.
  • ALUSION™ Small Cell - Natural
    This is a surface which is also created naturally as per the Mid cell version but in an even higher density. This version features a shiny shimmering silver skin with a unique waved pattern on the surface.

 

Connect with Us

We're on Social Networks. Follow us & get in touch!

    

ALUSION by Cymat Technologies Ltd.

6320 Danville Rd.
Mississauga, Ontario

1-905-696-9900
OR
Direct line for Sales at 1-905-696-2442

Email: sales@alusion.com